Система изолированных коридоров
- Материалы
- Парт-номера
- Спецификация
- Инструкция по монтажу
Siemon Aisle Containment Solutions are available in cold aisle containment (CAC) and hot aisle containment (HAC) with roof or vertical panels that can be easily attached to Siemon VersaPOD, V800 and V600 cabinets in a pod configuration to improve efficiency and expand the capacity of a data center. By either containing cold air supply to provide targeted cooling to active equipment and isolating it from the rest of the room (CAC), or by guiding hot air exhaust for efficient return to cooling systems (HAC), Siemon Aisle Containment Solutions prevent the mixing of hot and cold air in the data center. This allows higher temperature return air to improve the efficiency of existing cooling systems and reduce energy costs while preventing overprovisioning of air conditioning units. These passive containment solutions also cost effectively increase capacity by allowing greater heat densities without costly supplemental cooling. Custom size panels, door kits and several accessories are available to meet a wide variety of spaces and environments, including wall mount brackets for installation of a single cabinet row against a wall and riser brackets for greater headroom when using 42U cabinets.
- Hot aisle containment Standing Top and End Panels - Sized to match width of cabinet and height to suspended ceiling, these panels guide hot air to overhead air return.
- Cold aisle containment Roof Panels - These panels form a horizontal roof across the aisle to contain cold air for targeted cooling to active equipment.
- Angled Support Brackets - Provide lateral support to vertically mounted HAC standing top panels
- Self-closing or Manual Doors - Used to close off the end of the aisle with an integral frame design for smooth operation
Notes:
Angled Support Brackets
For supporting vertically mounted HAC top panels
Wall Mounting Brackets
Brackets to mount CAC roof panels to the wall when deploying containment for a single cabinet row
Filler Panels
These solid panels fill spaces where cabinets are not present, such as where columns or other obstructions exist.
Riser Brackets
These brackets are installed on top of cabinets in order to raise roof panels and increase clearance in the cold aisle. Riser brackets can aide in the installation of fire suppression systems within the contained space. They are also useful to establish a uniform level when differing heights of cabinets are used in an aisle.
Парт-номера
-
VC-AS-(XXX)-(YYY)B
Angled Support Bracket. For supporting vertically-mounted HAC top panels
(XXX) Width in cm
(YYY) = Height in cm
- VC-RPB-VPS-A12B SidePOD CAC roof panel. 1200mm long horizontal.
-
VC-RP(X)-VPN-A12B
VersaPOD CAC roof panel with window. 1200mm long horizontal.
(X) = A = Non-UL, B = UL -
VC-RP(X)-V8N-A12B
V800 CAC roof panel with window. 1200mm long horizontal.
(X) = A = Non-UL, B = UL -
VC-RP(X)-V6N-A12B
V600 CAC roof panel with window. 1200mm long horizontal
(X) = A = Non-UL, B = UL -
VC-RP(X)-(XXX)-A12B
Custom CAC roof panel with window. 1200mm long horizontal.
(X) = A = Non-UL, B = UL
(XXX) = Width in cm
- VC-FP-VPS-BB SidePOD,42U
- VC-FP-VPS-AB SidePOD,45U
- VC-FP-VPN-BB VersaPOD,42U
- VC-FP-VPN-AB VersaPOD,45U
- VC-FP-V8N-CB V800,44U
- VC-FP-V8N-BB V800,42U
- VC-FP-V8N-AB V800,45U
- VC-FP-V6N-CB V600,48U
- VC-FP-V6N-BB V600,42U
- VC-FP-V6N-AB V600,45U
-
VC-FP-(XXX)-(YYY)B
CustomUse (XXX) to specify width in cm
Use (YYY) to specify height in cm
-
VC-SE(X)-(XXX)-(YYY)B
Custom HAC Vertical Standing End Panels(X) = A = Non-UL, B = UL
(XXX) = Width in cm
(YYY) = Height in cm
-
VC-ST(X)-VPN-(YYY)B
VersaPOD Vertical Standing Top Panels(X) = A = Non-UL, B = UL
(YYY) = Height in cm -
VC-ST(X)-V8N-(YYY)B
V800 Vertical Standing Top Panels(X) = A = Non-UL, B = UL
(YYY) = Height in cm -
VC-ST(X)-V6N-(YYY)B
V600 Vertical Standing Top Panels(X) = A = Non-UL, B = UL
(YYY) = Height in cm -
VC-ST(X)-(XXX)-(YYY)B
Custom Vertical Standing Top Panels(X) = A = Non-UL, B = UL
(XXX) = Width in cm
(YYY) = Height in cm
-
VC-DR(X)-SSN-AB
45U Single self closing right 45U
(X) = A = Non-UL, B = UL -
VC-DR(X)-SSL-AB
45U Single self closing left 45U
(X) = A = Non-UL, B = UL -
VC-DR(X)-SMR-AB
45U Single manual closing right
(X) = A = Non-UL, B = UL -
VC-DR(X)-SML-AB
45U Single manual closing left
(X) = A = Non-UL, B = UL -
VC-DR(X)-DSN-AB
45U Double self closing
(X) = A = Non-UL, B = UL -
VC-DR(X)-DMN-AB
45U Double manual closing
(X) = A = Non-UL, B = UL
- VC-DR-SAB-CB 48U Single door adjustment bracket to raise doors when using 48U cabinets
- VC-DR-DAB-CB 48U Double door adjustment bracket to raise doors when using 48U cabinets
-
VC-EP(X)-C12B
End panel, 48U
(X) A = Non-UL, B = UL -
VC-EP(X)-B12B
End panel, 42U
(X) A = Non-UL, B = UL -
VC-EP(X)-A12B
End panel, 45U
(X) A = Non-UL, B = UL
- VC-RB-VPS-DB SidePOD,6U
- VC-RB-VPS-AB SidePOD,3U
- VC-RB-VPN-DB VersaPOD,6U
- VC-RB-VPN-AB VersaPOD,3U
- VC-RB-V8N-DB V800,6U
- VC-RB-V8N-AB V800,3U
- VC-RB-V6N-DB V600,6U
- VC-RB-V6N-AB V600,3U
-
VC-RB-(XXX)-(YYY)-B
CustomUse (XXX) to specify width in cm<br>
Use (YYY) to specify height in cm
- VC-WM-VPS-AB SidePOD Wall Mounting Brackets. Brackets to mount CAC roof panels to the wall when deploying containment for a single cabinet row.
- VC-WM-VPN-AB VersaPOD Wall Mounting Brackets. Brackets to mount CAC roof panels to the wall when deploying containment for a single cabinet row.
- VC-WM-V8N-AB V800 Wall Mounting Brackets. Brackets to mount CAC roof panels to the wall when deploying containment for a single cabinet row.
- VC-WM-V6N-AB V600 Wall Mounting Brackets. Brackets to mount CAC roof panels to the wall when deploying containment for a single cabinet row.
- VC-WM-(XXX)-AB Custom Wall Mounting Brackets. Brackets to mount CAC roof panels to the wall when deploying containment for a single cabinet row.
На сайте siemon.com на английском языке, откроется в новом окне
